HUMIPACKING® - Plastic-Components for Evaporative Cooler

Excellent cooling capacity
The special surface properties of the polypropylene compound in combination with the element‘s geometry ensure a very good cooling capacity.
Easy to clean / long service life
The use of welded, highly resistant polymer sheets (PP) allows the humidifying cooler to be cleaned without difficulty and without damaging the elements. In addition, the elements owe their durable mechanical
strength to thermal welding of the sheets. The use of polymer material in combination with thermal welding guarantees a long service life.
Impermeable to light
The element‘s geometry blocks out light.
Low pressure loss
HUMIPACKING® elements are characterized by low pressure loss.
UV resistance
The use of additives ensures outstanding resistance to UV light

Product overview HUMIPACKING®

Pressure Drop HUMIPACKING® Relative to air velocity - according to DLG test report
(average values for water flows between 0.4 and 1.7 m3/h)

This information has been put together with greatest care. However, any performance data given on this page is subject to compliance with certain surrounding conditions and hence may vary from case to case. Further, we reserve the right to make changes at any time without notice. We strongly recommend (i) reconfirmation with GEA 2H whether this information is still fully valid, before using it for final designs and (ii) to verify performance data taking into account the actual surrounding conditions. GEA 2H takes no responsibility for any consequences due to non-compliance with these recommendations..

If you want to learn more about a particular product or service offered by GEA 2H Water Technologies,
please klick here to request more information.
Or phone us:
+49 2233 6999 525.