Components for Mass Transfer: Structured Packings and Drift Eliminators

The 2H structured packings are high-capacity fills for chemical and physical absorption, desorption and for organic scrubbers. In view of their excellent compression strengths, they are also well suited for trickle bed reactors.

Due to the special configuration of the fill, a uniform distribution of liquid is maintained under both high and low hydraulic loads.

The structure of the material surface ensures a thorough mixing of the gas and liquid continuously. With the constant renewal of the gas/liquid boundary a high rate of mass transfer is ensured.

This is achieved with a very low pressure loss, particularly compared to random packings.

If you want to learn more about a particular product or service offered by GEA 2H Water Technologies, please klick here to request more information.

Or phone us:

+49 2233 6999 525.

Benefits of 2H packings:

Extremely low pressure loss
Excellent separating efficiency
High throughput capacity
Gas and liquid distribution maintained effectively through the pack
Very high compressive strength (Fitting height up to 10m)
High chemical resistance
Environmentally sound

Products:

GEA 2H Water Technologies' MASSdek serie fulfills the special requirements in mass transfer.

Type	MASSdek 250 HTC	MASSdek 150 HTC	MASSdek 125 HTC	MASSdek 80 Grid
Material	PP / PVC / PVDF
Specific surface (m²/m³)	240	150	125	80
Corrugation height (mm)	12	19	27	20
Max. Length (mm)	2400			509
Max. Width (mm)	600			604
Height (mm)	300 / 600			450
Max. operation temperature (°C)	140*			80
Void ratio (%)	> 97

* depending on material

GEA 2H Technologies delivers as well drift eliminators for mass transfer application. For more information please contact us by phone - tel. +49 2233 6999 525 or by mail following this link.